Cart 0

My drone’s motors are not working or not activating even though both the drone and remote lights are solid. How do I fix this?


First is to determine if the Barometric Pressure Sensor (or Altitude Lock) is activated or not. If it is on, which can also be determined if the left joystick’s up-down motion is spring-loaded, then you need to press and hold the Auto-Start button for 2-3 seconds until the drone lifts 2-3 feet from the ground. The Auto-Start button is the bottom left arch button of the four arch buttons at the center of the remote control. If the Barometric Pressure Sensor is off, then the motors should automatically spin when the left joystick is slowly pushed upwards.

Older Post Newer Post